The Particle Separator for the ProXP (76-2013 or 2884629) will not fit the Turbo R. While it is possible to install, it will rub on the reservoir of the rear shock. We have test fit it on multiple Turbo R's and while it is installable on Walker Evans cars it still makes slight contact with the shock. The larger bodied Fox shocks make it impossible to install on those vehicles.
If you purchased part numbers 76-2013 or 2884629 for your Turbo R, we recommend returning the unit you have currently by utilizing our upgrade program described below for part number 76-2020 as it will fit your vehicle much better and includes some design changes that increase performance of the Particle Separator. This part number will also be much easier to install.
Upgrade Program for the Particle Separator V2 (Fender Mounted) for Pro XP
While the Pro XP Fender Mounted Particle Separator meets the dust separation percentage that we advertise, customers still want the exceptionally clean air box seen on the roll bar mounted unit. Thus, S&B has redesigned the fender mounted Pro XP Particle Separator and has subjected Version 2 to extreme field testing. This new unit provides better separation of dust, snow, etc. and is significantly easier to install as it comes pre-assembled from our factory.
If you have the first version of our fender mounted Particle Separator and are not completely satisfied, we will gladly upgrade you to our new model at no cost. We expect to start shipping V2 at the end of April 2023. The install is simple as you can use the same wire harness currently installed on your vehicle.
How to take advantage of the upgrade program:
(1) simply purchase this new design (part # 76-2020) on our website.
(2) send an email to firstname.lastname@example.org requesting a full credit.
(3) S&B will send you a Return Authorization number along with a shipping label.
(4) Once you receive V2 of the Particle Separator, return your existing unit (housing only as you will re-use the wire harness) in the same box with the FedEx Label that we will provide via email. A FULL credit including the initial shipping costs will be applied to your credit card within 10 days of receiving your return.
Notes: Your credit card will not be charged until it ships. Once we receive your original unit back, we will credit your credit card for the full amount of your purchase. Please note that those getting the no cost upgrade, will need to utilize the wire harnesses from your existing unit; otherwise, the new unit will not be functional. The upgrade program ends Dec 31, 2023.
Please sign in to leave a comment.